Η επιστήμη κάνει άλματα και οι επιστήμονες από το πανεπιστήμιο στο UCLA (University of California, Los Angeles) έχουν βρει ένα νέο τρόπο για να κάνουν έκχυση νανοσωματιδίων silicon carbide σε ένα λιωμένο κράμα μαγνησίου και ψευδαργύρου.
Το αποτέλεσμα είναι ένα νανοσυνθετικό μέταλλο, με ρεκόρ επίπεδα ακαμψίας σε σχέση με το βάρος και την ειδική αντοχή του, καθώς και κορυφαία σταθερότητα στις υψηλές θερμοκρασίες. Το μαγνήσιο είναι ήδη το ελαφρύτερο δομικό μέταλλο, με αυτό εργαστηριακό προϊόν να διατηρεί το μικρό του βάρος, αλλά να το καθιστά πολύ ισχυρότερο. Επίσης, οι ερευνητές αναφέρουν ότι ανέπτυξαν μια αρθρωτή διαδικασία κατασκευής, κάτι που ανοίγει την πόρτα σε ελαφρύτερα και πιο άκαμπτα αυτοκίνητα, αεροπλάνα, ιατρικές συσκευές και διάφορα άλλα προϊόντα.
Το καρβίδιο του πυριτίου είναι το υπερ-ανθεκτικό υλικό που χρησιμοποιείται στους συμπλέκτες αυτοκίνητου και τα κεραμικά φρένα. Τα νανοσωματίδια εκχύνονται στο λειωμένο μέταλλο πριν, αλλά αυτά τείνουν να συγκεντρώνονται όλα μαζί. Η σημαντική ανακάλυψη του UCLA ήταν τα νανοσωματίδια καρβιδίου του πυριτίου να κατανέμονται ομοιόμορφα σε ολόκληρο το τηγμένο μαγνήσιο, και στη συνέχεια, χρησιμοποιώντας υψηλής πίεσης στρέψη τα συμπιέζει ώστε το προκύπτον μέταλλο να καθίσταται ακόμη ισχυρότερο.
Η αναλογία του κράματος αποτελείται από 14% καρβίδιο του πυριτίου, 86% μαγνήσιο, με τον επικεφαλή ερευνητή Xiaochun Λι να αναφέρει χαρακτηριστικά:
Αυτή η πρώτη επιτυχημένη προσπάθεια είναι ακριβώς ένα ξύσμα στη επιφάνεια του κρυμμένου θησαυρού για μια νέα κατηγορία μετάλλων με επαναστατικές ιδιότητες και λειτουργίες.
Δελτίο Τύπου
UCLA researchers create exceptionally strong and lightweight new metal
Magnesium infused with dense silicon carbide nanoparticles could be used for airplanes, cars, mobile electronics and more
December 23, 2015 – A team led by researchers from the UCLA Henry Samueli School of Engineering and Applied Science has created a super-strong yet light structural metal with extremely high specific strength and modulus, or stiffness-to-weight ratio. The new metal is composed of magnesium infused with a dense and even dispersal of ceramic silicon carbide nanoparticles. It could be used to make lighter airplanes, spacecraft, and cars, helping to improve fuel efficiency, as well as in mobile electronics and biomedical devices.
To create the super-strong but lightweight metal, the team found a new way to disperse and stabilize nanoparticles in molten metals. They also developed a scalable manufacturing method that could pave the way for more high-performance lightweight metals. The research was published today in Nature.
“It’s been proposed that nanoparticles could really enhance the strength of metals without damaging their plasticity, especially light metals like magnesium, but no groups have been able to disperse ceramic nanoparticles in molten metals until now,” said Xiaochun Li, the principal investigator on the research and Raytheon Chair in Manufacturing Engineering at UCLA. “With an infusion of physics and materials processing, our method paves a new way to enhance the performance of many different kinds of metals by evenly infusing dense nanoparticles to enhance the performance of metals to meet energy and sustainability challenges in today’s society.”
Structural metals are load-bearing metals; they are used in buildings and vehicles. Magnesium, at just two-thirds the density of aluminum, is the lightest structural metal. Silicon carbide is an ultra-hard ceramic commonly used in industrial cutting blades. The researchers’ technique of infusing a large number of silicon carbide particles smaller than 100 nanometers into magnesium added significant strength, stiffness, plasticity and durability under high temperatures.
The researchers’ new silicon carbide-infused magnesium demonstrated record levels of specific strength — how much weight a material can withstand before breaking — and specific modulus — the material’s stiffness-to-weight ratio. It also showed superior stability at high temperatures.
Ceramic particles have long been considered as a potential way to make metals stronger. However, with microscale ceramic particles, the infusion process results in a loss of plasticity.
Nanoscale particles, by contrast, can enhance strength while maintaining or even improving metals’ plasticity. But nanoscale ceramic particles tend to clump together rather than dispersing evenly, due to the tendency of small particles to attract one other.
To counteract this issue, researchers dispersed the particles into a molten magnesium zinc alloy. The newly discovered nanoparticle dispersion relies on the kinetic energy in the particles’ movement. This stabilizes the particles’ dispersion and prevents clumping.
To further enhance the new metal’s strength, the researchers used a technique called high-pressure torsion to compress it.
“The results we obtained so far are just scratching the surface of the hidden treasure for a new class of metals with revolutionary properties and functionalities,” Li said.
The new metal (more accurately called a metal nanocomposite) is about 14 percent silicon carbide nanoparticles and 86 percent magnesium. The researchers noted that magnesium is an abundant resource and that scaling up its use would not cause environmental damage.
The paper’s lead author is Lian-Yi Chen, who conducted the research as a postdoctoral scholar in Li’s Scifacturing Laboratory at UCLA. Chen is now an assistant professor of mechanical and aerospace engineering at Missouri University of Science and Technology.
The paper’s other authors from UCLA include Jia-Quan Xu, a graduate student in materials science and engineering; Marta Pozuelo, an assistant development engineer; and Jenn-Ming Yang, professor of materials science and engineering.
The other authors on the paper are Hongseok Choi, of Clemson University; Xiaolong Ma, of North Carolina State University; Sanjit Bhowmick of Hysitron, Inc. of Minneapolis; and Suveen Mathaudhu of UC Riverside.
The research was funded in part by the National Institute of Standards and Technology.
Πηγή
0 σχόλια:
Δημοσίευση σχολίου